Jeep WRANGLER 2017 User Manual page 248

Finding Place Of Interest
• From the NAV main menu, press the
"Find/Enter Destination" button on the
touchscreen.
• Press "Find Places" and select a Category
and then a subcategory, if necessary.
• Select your destination and press "GO."
Finding A Place By Entering The Street Address
• From the NAV main menu, press "Find/
Enter Destination" and then press the
"Find Address" button on the touch-
screen.
NOTE:
If the Country displayed is incorrect, press
the corresponding button on the touchscreen
to make the correction.
• Once the Country and City are set, press
the "Street" button on the touchscreen
and begin spelling the street name in the
speller.
246
• The most likely street name is always
shown in the input field. To accept it,
press the green check-mark button on the
touchscreen.
If the desired name does not show up, the
names that match the string appear in a list
after entering a couple of characters (to open
the list of results before it appears automati-
cally, press the "Results" button on the
touchscreen). Select the street from the list.
• Press the "House Number" button on the
touchscreen.
Enter the house number on the keyboard. (To
enter letters, press the "ABC" or "QWE"
button on the touchscreen, depending on the
keyboard being used).
• A full screen map appears with the se-
lected point in the middle.
• Press the "Go" button on the touchscreen
and start your journey.
Entering Your Home Location
• Push the MENU button on the right side of
the radio faceplate.
• Press the "My Files" button on the touch-
screen.
• Press the "My Address Book" button on
the touchscreen.
• Press the "Home" button on the touch-
screen.
• Follow the prompts on the navigation radio
to complete this process.