Uconnect® Voice Command - Jeep Wrangler 2015 User Manual

Uconnect® VOICE COMMAND
Voice Command Operation
The Uconnect Voice Command system allows you to control your AM, FM radio,
®
satellite radio, disc player, HDD, Uconnect
portable media devices.
• When you push the "Voice Command" button
or steering wheel, you will hear a beep. The beep is your signal to give a command.
If you do not say a command within a few seconds, the system will present you
with a list of options. If you ever want to interrupt the system while it lists options,
push the "Voice Command" button
command.
NOTE:
U.S. residents visit driveuconnect.com for more info on which voice command
features apply to your vehicle. Canadian residents visit driveuconnect.ca for more
info on which voice command features apply to your vehicle.
• Start a dialogue by pushing the "Voice Command" button
beep. The beep is your signal to give a command. Below are a list of voice
commands for each of the different modes.
Common Voice Commands (Examples)
While In:
Main Menu
ELECTRONICS
® Phone, a memo recorder, and supported
Voice Command Example:
"Radio AM" (to switch to the AM radio mode)
"Radio FM" (to switch to the FM radio mode)
"Satellite Radio" (to switch to the Satellite radio mode)
"Disc" (to switch to the disc mode)
"USB" (to switch to the USB mode)
"Bluetooth Streaming" (to switch to the Bluetooth
Streaming mode)
"Memo" (to switch to the memo recorder)
"System Setup" (to switch to system setup)
located on the radio faceplate
, listen for the BEEP, and say your
Voice Command Ready
, you will hear a
®
97