Table of Contents
Advertisement
2
GENERAL POINTS
2.1
General information
The contents of this document are based on the information available at the time of
publication.
Usines Métallurgiques de Vallorbe SA pursue a policy of continuous development.
Consequently, we reserve the right to modify or improve without notice any product
featured in this manual. Moreover, Usines Métallurgiques de Vallorbe SA disclaims
any liability for any errors in this document.
The original version of the document was written in French.
The information contained within this document is the property of Usines
Métallurgiques de Vallorbe SA. It has been compiled solely for internal use by the
end customer, to the exclusion of any other usage; copying this information or
sending it to a third party is prohibited.
2.2
Operating environment
This machine is designed to be used mainly indoors.
The environmental conditions of the machine (whether operating
indoors or outdoors) must be controlled, to avoid damaging the
device:
- No rain
- Temperature of between -10°C and 50°C
- Humidity level less than 90%, without condensation
The V|OAK device can be connected to a portable power source such
as a 12VDC to 24VDC battery.
7/64
Advertisement
Table of Contents
