Required Equipment And Important Notes - Vallorbe V|OAK User Manual

Automatic sharpener
3.4

Required equipment and important notes

3.4.1 12 VDC power converter included
Use only the power converter provided.
The power converter included may be connected to a correctly earthed
single-phase alternating power source, with voltage 110VAC or
240 VAC, 50 or 60 Hz.
Using the equipment with a non-earthed system could expose it to
electrical damage.
3.4.2 Saw chain type
It is prohibited to use a saw chain that the machine cannot sharpen. You
will find the authorised chain types in the "Operating parameters"
chapter.
Non-compliance with this rule could damage the machine and injure the
user.
3.4.3 Sturdy surface with suitable coating
Use an industrial workbench or an appropriate solid unit to support this
equipment, or any additional consumables. Decent lighting provides
clear visibility, and may help prevent accidents and reduce fatigue.
Refer to the "Preliminary assembly" chapter for how to hold the device in
position.
14/64