Table of Contents
Advertisement
6.6
Chain pusher
Two chain pushers are provided with the sharpener. The chain pusher needs to be
changed according to the pitch of the chain to be sharpened.
The standard chain pusher is fitted on the sharpener by default.
Chain pitch
1/4"
3/8" low profile
0.325
3/8"
.404"
The standard chain pusher (1) can be distinguished from the .404" chain pusher
(2) by the curve present under its end.
1
To change the chain pusher, remove the screw (3). Use the fork
wrench supplied in the package to hold the nut (4) in position.
Suitable chain pusher
Standard chain pusher
Standard chain pusher
Standard chain pusher
Standard chain pusher
.404" chain pusher
3
27/64
2
4
Advertisement
Table of Contents
