User Intervention During Sharpening - Vallorbe V|OAK User Manual

Automatic sharpener
If the number of file stroke is different from left to right, the letter "C" (for "Catch up")
will be displayed.
7.4

User intervention during sharpening

7.4.1 Pause
Press the back button once.
7.4.2 Resuming a paused sharpening operation
Press the Confirm button to resume sharpening with the same parameters.
7.4.3 Cancelling sharpening
Press the back button twice.
7.4.4 Standby mode
The sharpener switches itself in standby mode after 15minutes of inactivity. While
in standby mode the green led will flash slowly.
To exit standby mode, press on one of the 4 buttons to re-activate the display.
50/64