Automatic sharpener
6
OPERATING PARAMETERS
6.1
Associated equipment
Only the file holders in the table below can be used on the V|OAK device. The
automatic sharpener is delivered by default with reference
Reference
VLC-100-001
VLC-100-002
File holders kit 4 mm, right
VLC-100-003
Use the saw chain tensioner whenever using the V|OAK device.
6.2
Suitable chains and files
Refer to the table below to find out which saw chain pitches are acceptable for the
V|OAK device:
Saw chain
Saw chain
pitch
square and
1/4"
round
3/8"
square and
low profile
round
square and
0.325
round
square and
3/8"
round
square and
.404"
round
Use on the machine of a saw chain with an unsuitable pitch may damage the
V|OAK device and the saw chain.
Part
File holders kit 5.2 -
5.5 mm, right and left
File holders kit 4.5 -
4.8 mm, right and left
and left
Suitable file diam-
type
eter (inches)
5/32"
5/32"
11/64" and 3/16"
13/64" and 7/32"
.404"
Suitable file diam-
eter (mm)
5.2 and 5.5
4.5 and 4.8
4.0
Correspond-
ence in (mm)
4.0
4.0
4.5 and 4.8
5.2 and 5.5
5.5
22/64
VLC-100-001.
Suitable file
diameter (inches)
13/64" and 7/32"
11/64" and 3/16"
5/32"
File holder type
4.0 mm file holder
4.0 mm file holder
4.5 - 4.8 mm file
holder
5.2 - 5.5 mm file
holder
5.2 - 5.5 mm file
holder