Map Range; Map Symbols - Garmin 400W Series Pilot's Manual & Reference

Map Symbols

Various symbols are used to distinguish between
waypoint types. The identifiers for any on-screen
waypoints can also be displayed. (By default the iden-
tifiers are enabled). Special-use and controlled airspace
boundaries appear on the map, showing the individual
sectors in the case of Class B or Class C airspace.
The following symbols are used to depict the various
airports and navaids on the map page:
Airport with hard surface runway(s); Primary runway shown
Airport with soft surface runway(s) only
Private Airfield
VOR
VOR/DME
DME
Localizer
Heliport
190-00356-00_0B.indd 33

Map Range

The map display can be set to 23 different scale
settings from 500 feet to 2000 nautical miles (statute
and metric units are also available). The scale is indi-
cated in the lower left-hand corner of the map display,
and represents the top-to-bottom distance covered by
the map display.
To select a map Range:
1.
2.
Intersection
VORTAC
TACAN
NDB
Locator Outer Marker
190-00356-00 Rev B
2 - NAV PAGES
Map Page
Press the up arrow sde of the RNG key to
zoom out to a larger map area.
Press the down arrow sde of the RNG key
to zoom n to a smaller map area and more
detal.
33
9/7/2007 2:49:08 PM