Garmin 400W Series Pilot's Manual & Reference page 13

Right-hand Keys and Knobs
Right-hand Keys and Knobs
The range key (RNG) allows you to select
R
the desired map scale. Use the up arrow side
of the key to zoom out to a larger area, or
the down arrow side to zoom in to a smaller
area.
The direct-to key provides access to the
D
direct-to function, which allows you to enter
a destination waypoint and establishes a
direct course to the selected destination. See
Section 3.
The MENU key displays a context-sensitive
m
list of options. This options list allows you
to access additional features or make settings
changes which relate to the currently dis-
played page.
The clear key (CLR) is used to erase infor-
c
mation or cancel an entry. Press and hold
this key to immediately display the Default
Navigation Page, regardless of which page is
currently displayed.
190-00356-00_0B.indd 3
The enter key (ENT) is used to approve an
E
operation or complete data entry. It is also
used to confirm information, such as during
power on.
The large right knob is used to select
d
between the various page groups: NAV, WPT,
AUX or NRST. With the on-screen cursor
enabled, the large right knob allows you to
move the cursor about the page.
The small right knob (CRSR) is used to
a
select between the various pages within one
of the groups listed above. Press this knob
momentarily to display the on-screen cursor.
The cursor allows you to enter data and/or
make a selection from a list of options.
190-00356-00 Rev B
TAKEOFF TOUR
Key and Knob Functions
3
9/7/2007 2:48:57 PM