Ifr Procedures - Garmin 400W Series Pilot's Manual & Reference

Hide thumbs Also See for 400W Series:
Table of Contents

Advertisement

IFR Procedures

Once the direct-to or flight plan is confirmed, the
whole range of instrument procedures is available to
you. Departures (SIDs), arrivals (STARs), non-preci-
sion and precision approaches are stored within the
NavData card and available using the PROC (proce-
dures) key.
To display the procedures page, press PROC.
The steps required to select and activate an
approach, departure or arrival are identical. In this
introductory section, we'll show examples of the steps
required to select an approach, but keep in mind the
same process also applies to departures and arrivals.
To select an approach, departure, or arrival:
1.
Turn the small right knob to select the desred
opton ("Select Approach?", "Select Arrval?"
or "Select Departure?") from the procedures
page.
Press the PROC key to display the procedures
page. Turn the large right knob to select the
Press ENT to dsplay a lst of avalable proce-
2.
dures for the arrval (when usng approaches
or STARs) or departure (when usng SIDs)
arport.
Turn the small right knob to select the desred
3.
procedure and press ENT.
190-00356-00_0B.indd 17
desired option.
190-00356-00 Rev B
4.
For approaches, a wndow appears to select the
desred ntal approach fix (IAF) or provde a
"vectors" opton to select just the final course
segment of the approach. Turn the small right
knob to select the desred opton and press
ENT. Vectors gudance s relatve to the final
nbound course. A lne s drawn beyond the
final approach fix, allowng you to ntercept
the final course segment beyond ts normal
lmts.
A window will appear to select the desired
procedure. Use the large right knob to make
your selection.
5.
For departures and arrvals, a wndow appears
to select the desred transton. Turn the small
right knob to select the desred opton and
press ENT.
Wth "Load?" hghlghted, press ENT to add
6.
the procedure to the flght plan or drect-to.
In your flight plan or direct-to, the departure
or arrival airport is replaced with the sequence of
waypoints contained within the selected procedure.
TAKEOFF TOUR
IFR Procedures
17
9/7/2007 2:49:03 PM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gnc 420awGnc 420wGns 430awGns 430wGps 400w

Table of Contents