Garmin 400W Series Pilot's Manual & Reference page 45

Map Panning
Panning allows you to move the map beyond its
current limits without adjusting the map range. When
you select the panning function — by pressing the
small right knob — a target pointer will flash on the
map display. A window will also appear at the top of
the map display showing the latitude/longitude posi-
tion of the pointer, plus the bearing and distance to
the pointer from your present position.
To select the panning function and pan the map
display:
1. Press the small right knob to actvate the
pannng target ponter.
Turn the small right knob to move up (turn
2.
clockwse) or down (counterclockwse).
3. Turn the large right knob to move rght (turn
clockwse) or left (counterclockwse).
4. To cancel the pannng functon and return to
your present poston, press the small right
knob.
190-00356-00_0B.indd 35
When the target pointer is placed on an object,
the name of that object will be highlighted (even if
the name wasn't originally displayed on the map).
This feature applies to airports, navaids, user-created
waypoints, roads, lakes, rivers — almost everything
displayed on the map except route lines.
When an airport, navaid, or user waypoint is
selected on the map display, you can review informa-
tion about the waypoint or designate the waypoint as
your direct-to destination.
To review information for an on-screen airport,
navaid or user waypoint:
1. Use the pannng functon (as descrbed above)
to place the target ponter on a waypont.
2. Press ENT to dsplay the waypont nformaton
page(s) for the selected waypont.
Press CLR to ext the nformaton page(s).
3.
190-00356-00 Rev B
2 - NAV PAGES
Map Page
35
9/7/2007 2:49:08 PM