Installation; Safety Notes - Baumuller BFN 3-1-0007-001 Instruction Handbook Manual

This chapter describes the electrical installation of the device. The mechanical mounting
is described in
The technical preconditions must be complied with before installation:
1 Check the requirements to the power supply.
2 Check the requirements to the cables and the availability of the accordant cables.
3 Check the properties of the connections and the configuration of the cables.
7.1

Safety notes

NOTE!
Installation must be made by employees of the manufacturer or by other qualified per-
sonnel.
Qualified personnel are persons who – on account of their occupational training, ex-
perience, instruction and knowledge of relevant standards and stipulations, accident
prevention regulations and operating conditions – are authorized by the persons re-
sponsible for the safety of the facilities, to perform the respective activities that are
necessary. Qualified personnel must recognize and prevent potential risks. The qual-
ifications necessary for working with the device for example are:
m Occupational training or instruction, and the authorization to commission, ground
m Occupational training or instruction, in accordance with the standards of work safe-
ZMounting–
and mark electrical power circuits and devices in accordance with the standards of
the safety engineering.
ty, for the care and use of appropriate safety equipment.
from page 41
Instruction handbook Mains filters BFN
Document No.: 5.09010.03
I
NSTALLATION
7
45
of 70