Requirements To The Energy Supply: Power Supply - Baumuller BFN 3-1-0007-001 Instruction Handbook Manual

3.1
Operating conditions
3.1.2

Requirements to the energy supply: power supply

Power supply system
(see ZSystem types– from
page 15)
Rated input supply voltage/frequency (U
Absolute input supply voltage (U
Absolute frequency maximum
Harmonic frequencies (mains voltage)
EN 61800-3, chapter 5.2.2.1, table 2
Mains voltage asymmetry
EN 61000-2-4, table 1
Commutation notches
EN 61800-3, chapter 5.2.2.1, table 2
Voltage drops
EN 61000-2-1
Voltage changes/fluctuation
EN 61000-2-1
16
Instruction handbook Mains filters BFN
Document No.: 5.09010.03
of 70
BFN 3-1-XXXX-X01
BFN 3-1-XXXX-X02
)
AC
)
AC
Industrial system with high- or low-impedance
star point (TN-system or TT-system)
Industrial system with no star point or a high-
impedance star point (IT-system)
Industrial system with a direct or low impedance
grounded junction of phases
(grounded delta wye)
3 x 400 V 50/60 Hz
3 x 480 V 50/60 Hz
max. 3 x 528 V / 50/60 Hz
63 Hz
THD
U
max. 3 %
Notch depth < 40%, area < 250% x degree
10 % to 100 %
+/-10 %
+10 % to -15 % for b 1 min
Baumüller Nürnberg GmbH
b 10 %