Electrical Data - Baumuller BFN 3-1-0007-001 Instruction Handbook Manual

3.4

Electrical data

3.4 Electrical data
DANGER!
Danger to life due to high discharge current!
Therefore:
m The cross-section of the protective conductor must be at least 10 mm
NOTE!
Rated current of used filters must be greater or the same with the RMS values of the
actual mains current (actual mains current = RMS value of the mains current during
the total cycle time of the drive). The RMS value is calculated at short-time operation
(S3) as follows:
28
Instruction handbook Mains filters BFN
Document No.: 5.09010.03
of 70
5-1 chap. 4.3.5.5.2).
T
1
 2
-- - i
I = dt
eff
T
0
2
(EN 61800-
Baumüller Nürnberg GmbH