Panasonic KX-TDA30 Getting Started page 26

4.3 Programming the Hybrid IP-PBX
Assigning the Incoming Trunk Call Destination
26 Getting Started
For analogue trunk user (DIL Setting):
1.
Double-click "CO & Incoming Call".
2.
Double-click "DIL Table & Port Setting".
3.
Click the "DIL" tab.
4.
For necessary items, enter the proper numbers and
selections.
5.
Click [OK].
For ISDN trunk user (DDI Setting):
1.
Double-click "CO & Incoming Call".
2.
Double-click "DDI/DID Table".
3.
For necessary items, enter the proper numbers and
selections.
4.
Click [OK].
For ISDN trunk user (MSN Setting):
1. Double-click "CO & Incoming Call".
2. Double-click "DIL Table & Port Setting".
3. Click the "DDI / DID / TIE / MSN" tab.
4. Set the "Incoming Type" of the desired ports to
"MSN".
5. Click [OK].
6. Double-click "MSN Table".
7. Click the "Main" tab.
8. For necessary items, enter the proper numbers and
selections.
9. Click [OK].