Connecting The Pc; Installing The Kx-Tda30 Maintenance Console - Panasonic KX-TDA30 Getting Started

4.1 Connecting the PC

4.1 Connecting the PC
KX-TDA30 Maintenance Console serves as an overall system programming tool for the Hybrid IP-
PBX. KX-TDA30 Maintenance Console's Quick Setup lets you easily configure the Hybrid IP-PBX to
receive intercom and trunk calls, as well as apply basic settings such as time and date.
Note
The contents and design of the software are subject to change without notice.
To programme the Hybrid IP-PBX, connect it to the PC with serial interface.
Serial Interface Connection
4.2

Installing the KX-TDA30 Maintenance Console

For the system requirements of the PC (e.g., operating system, hardware specifications), refer to
"3.3.1 Installing and Starting the KX-TDA30 Maintenance Console" in the Installation Manual.
22 Getting Started
RS-232C Port
USB Port
RS-232C (Cross Cable)
Pin Assignments
RS-232C Port
Pin No.
2
3
4
5
6
7
8
To COM Port
PC
To USB Port
PC
COM Port
Pin No.
2
3
4
5
6
7
8