Setting The Temperature - CDA FW422 Installation, Use And Maintenance Manual

Setting the temperature

You must allow the fridge to settle for at least twenty four hours
prior to switching the power on.
To adjust the temperature turn the thermostat control knob clockwise
(from off) to the required level. The temperature becomes colder the
higher the number on the control.
When the thermostat is set to 0 the cooling system is switched off.
We recommend initially setting the temperature control in mid range
for the first 24 hours then adjusting the temperature up or down from
this point as your personal preference.
Use
Fridge
• Never put liquids in the refrigerator uncovered.
• Never put hot foods in the refrigerator. Warm food should be
allowed to cool to room temperature before being put into the
refrigerator.
• Nothing should rest against the rear wall of the refrigerator, as this
will cause frost and possible condensation problems which will be
difficult to remove.
• Make sure food is clean and any extra water is wiped away before
putting into the fridge.
• Wrap or cover food before putting into the fridge. This will help
prevent the loss of moisture, keep food fresh and avoid unpleasant
odours.
• Sort foods prior to storing. Any foods to be used soon should be
7