Setting The Fridge Temperature - CDA PC52 Installation, Use And Maintenance Manual

unlock the control panel are detailed below and on page 13 of this
User Manual.
NOTE:
Before attempting to adjust the temperature or function of your
appliance, ensure the appliance is not in "Lock" mode - make sure
the lock icon
hold the "Safety Key Lock sensor" (F) for three seconds to switch the
"Lock" mode off. You will see the padlock icon is now off and you can
proceed to use your appliance.

Setting the fridge temperature

• Touch the "Refrigerator selector" (A) once so that the refrigerator
and freezer temperature displays illuminate (if the displays are
already illuminated then you need only perform the following steps).
• Touch the "Refrigerator selector" (A) as many times as necessary to
achieve the desired temperature. This may be set between 1°C and
9°C and each touch will alter the temperature by an increment of 1°C.
The optimum temperature for the refrigerator to be set to is 5°C.
• Leave the display for around five seconds to stop flashing and the
temperature is set.
NOTE: After the display stops flashing it will revert to displaying
the current temperature of the relevant compartment. However the
appliance will still work towards the temperature that has just been
set.
is not illuminated. If it is in "Lock" mode touch and
8