Routine Maintenance; Remove And Install The Front Cover - Friedrich Q Series Service & Parts Manual

ROUTINE MAINTENANCE

REMOVE AND INSTALL THE FRONT COVER

WARNING
ELECTRIC SHOCK HAZARD
Disconnect power to the unit before
servicing. Failure to follow this warning
could result in serious injury or death.
37
Figure 401 (Remove and Install the Front Cover)
Remove the decorative front cover.
1.Remove screws if installed.
EntryGard™
2. Open the decorative front cover door.
3. Locate and disconnect electronic control power
cable harness.
4. Remove 4 screws attaching decorative front cover.
Save to reinstall later.
5. Remove decorative front cover. Store in a safe place
to reinstall later.
Install the decorative front cover.
1. Reinstall the 4 screws attaching decorative front
cover.
2. Locate and reconnect electronic control power
cable harness
3. Close the decorative front cover door.
4. Reinstall the
EntryGard™
screews if installed.