Configuring Other Routers On Your Lan - Siemens SpeedStream SS2624 User Manual

Wireless dsl/cable router
Table of Contents

Advertisement

Buttons
Save
Add
Update
Delete
Clear Form
Generate Report

Configuring Other Routers on your LAN

It is essential that all IP packets for devices not on the local LAN be passed to the DSL/Cable
Router, so that they can be forwarded to the external LAN, WAN, or Internet. To achieve this,
the local LAN must be configured to use the DSL/Cable Router as the Default Route or Default
Gateway.
Local Router
The local router is the Router installed on the same LAN segment as the DSL/Cable Router.
This router requires that the Default Route is the DSL/Cable Router itself. Typically, routers
have a special entry for the Default Route. It should be configured as follows.
Destination IP Address
Network Mask
Gateway IP Address
Metric
Other Routers on the Local LAN
Other routers on the local LAN must use the DSL/Cable Router's Local Router as the Default
Route. The entries will be the same as the DSL/Cable Router's local router, with the exception
of the Gateway IP Address.
For a router with a direct connection to the DSL/Cable Router's local Router, the Gateway
IP Address is the address of the DSL/Cable Router's local router.
For routers which must forward packets to another router before reaching the DSL/Cable
Router's local router, the Gateway IP Address is the address of the intermediate router.
Save the RIP setting. This has no effect on the Static Routing Table.
Add a new entry to the Static Routing table, using the data shown in
the "Properties" area on screen. The entry selected in the list is
ignored, and has no effect.
Update the current Static Routing Table entry, using the data shown
in the "Properties" area on screen.
Delete the current Static Routing Table entry.
Clear all data from the "Properties" area, ready for input of a new
entry for the Static Routing table.
Generate a read-only list of all entries in the Static Routing table.
Normally 0.0.0.0, but check your router documentation.
Normally 0.0.0.0, but check your router documentation.
The IP Address of the DSL/Cable Router.
1
Advanced Configuration
79

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents