Options - Siemens SpeedStream SS2624 User Manual

DSL/Cable Router User Guide

Options

This screen allows advanced users to enter or change a number of settings. For normal opera-
tion, there is no need to use this screen or change any settings. An example Options screen is
shown below.
Data - Options Screen
Backup DNS
IP Address
TFTP
Enable Firm-
ware Upgrade
using TFTP
UPnP
Enable UPnP
Services
Allow Configu-
ration...
Figure 42: Options Screen
Enter the IP Address of the DNS (Domain Name Servers) here. These
DNS will be used only if the primary DNS is unavailable.
If enabled, TFTP (Trivial FTP) can be used to upgrade the firm-
ware in this device. This is normally not required; a Windows
utility is available for this purpose.
You must obtain the firmware upgrade file first; instructions for
using TFTP will be available with the upgrade.
UPnP (Universal Plug and Play) allows automatic discovery and
configuration of equipment attached to your LAN. UPnP is by
supported by Windows ME, XP, or later.
If Enabled, this device will be visible via UPnP.
If Disabled, this device will not be visible via UPnP.
If checked, then UPnP users can change the configuration.
If Disabled, UPnP users can only view the configuration.
72