Physical Details - Siemens SpeedStream SS2624 User Manual

DSL/Cable Router User Guide

Physical Details

LEDs
The front panel contains the following LEDs.
Power
Status
LAN Ports
(1, 2, 3, 4)
WAN Port
Wireless
Print Act
Print Err
On - Normal operation.
Off - No power
On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up, or when the Firmware is being
upgraded.
For each LAN port, there are 2 LEDs
Link/Act
On - Corresponding LAN (hub) port is active.
Off - No active connection on the corresponding LAN (hub) port.
Flashing - Data is being transmitted or received via the corre-
sponding LAN (hub) port.
100
On - Corresponding LAN (hub) port is using 100BaseT.
Off - Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
Flashing - data is being transmitted or received via the WAN port.
Off - no data is being transferred.
On - Wireless connection available; Wireless Access Point is ready for
use.
Off - No Wireless connection available.
Flashing - Data is being transmitted or received via the Wireless access
point. This includes "network traffic" as well as user data.
On - Connection to printer established.
Off - No connection to printer; printer is Off or Off-line.
Flashing - Data is being transmitted to the printer.
On - Printer error detected.
Off - No printer error detected.
4