Honda EU65is Owner's Manual page 67

07/09/15 12:32:13 32Z25610_066
Wheel Kit Installation
Do not operate the generator without the wheel kit installed. The
wheel kit provides an air space between the ground and the generator
air intake.
If the wheel kit is not installed, it may be possible for dirt and debris to
be drawn into the generator air intake causing possible generator
damage. Always operate the generator with the wheel kit installed.
1. Install the two wheels on the axle shaft using the washers and cotter
pins.
2. Install the axle assembly on the generator using four 8
flange bolts and four 8 mm washers (t=2.3 mm).
3. Install the two stands on the under frame using four 8
flange bolts and four 8 mm washers (t=6 mm).
TORQUE: 24 29 N·m (2.4 3.0 kgf·m , 17 22 lbf·ft) −
8 mm WASHER (4)
(t = 6 mm)
8 25 mm ×
FLANGE BOLT (4)
STAND (2)
WHEEL (2)
62
− −
8 25 mm FLANGE BOLT (4) ×
× 25 mm
× 25 mm
S S H H O O R R T T E E R R
8 mm WASHER (4)
(t = 2.3 mm)
20 mm WASHER (2)
AXLE
4.0 28 mm ×
COTTER PIN (2)