Notes On Connection - Sony BKP-7933 Installation Manual

1-6. Connection

1-6-3. Notes on Connection

To connect the devices to the S-BUS line, refer to Section 1-6-4 and following precautions.
. The cable length of one S-BUS line is a maximum of 500 m (when a BELDEN 8281 or the equivalent
is used).
. Be sure to terminate the BNC connector (T bridge) attached to the last machine of the S-BUS line with
a 75 Z terminator.
REMOTE S-BUS
(BNC connector, male)
BKP-7933
1-8 (E)
<Primary station>
BELDEN 8281 cable
(shorter than 50 cm)
<Secondary device>
BNC Connector (T bridge)
BKP-7933