Sony PEGA-WL110 Operating Instructions (primary manual) Operating Instructions Manual page 36

Symptom
You cannot browse
homepages.
The data transfer rate is
slow.
You cannot perform a
HotSync operation.
Tip
You can view communication preferences (e.g. IP Address you are using, IP
Address of DNS server, etc) while performing communications using your CLIÉ
handheld in which this Wireless LAN card is inserted, show the [Network]
screen of [Preferences]. Select [Option] on the menu, then select [View Log].
US
36
Cause/Remedy
p Check the settings of the web browser
you are using.
For details on how to set the web
browser, see its operating instructions.
Some other Wireless LAN access points
are interfering with the communication.
p Change the channel number of the
Wireless LAN access point you are using.
For details on how to change the setting,
see the Operating Instructions of your
Wireless LAN access point.
The Wireless LAN access point is being
heavily used.
p Wait a while and try to Wireless LAN
access it again.
An obstacle may be blocking off radio
waves (e.g., metal plate, concrete block
water) between your CLIÉ handheld and
the Wireless LAN access point.
p Move your CLIÉ handheld and/or the
Wireless LAN access point to different
places.
p Disable the power saving mode. For details,
see "Advanced Settings" on page 20.
p Check the settings of HotSync.
For details on how to set HotSync, see the
operating instructions supplied with your
CLIÉ handheld.
Also, if your computer has a Firewall,
Hotsync operation may not function
correctly.