Sony PEGA-WL110 Operating Instructions (primary manual) Operating Instructions Manual page 13

4
Click [Done] in Install Tool window.
Your computer is ready to install the Wireless LAN utility on your
CLIÉ handheld. In the next step, you will perform a HotSync
operation to carry out the installation.
5
Click the
that is located in the bottom right-hand corner of the
Windows display on your computer.
The [Local USB] check box should be selected in the shortcut
menu on the display.
Tip
If you cannot find the
[Programs] ([All Programs] in Windows
[HotSync Manager] to start up the HotSync manager, from the [Start]
menu.
6
Execute a local HotSync operation on your CLIÉ
handheld.
The Wireless LAN utility is installed on your CLIÉ handheld.
Note
Part of this software application extends into the system of CLIÉ handheld.
Therefore, it cannot be uninstalled.
After you perform a hard reset
Make sure you reinstall this utility.
After a hard reset, normally, the backup data on a personal computer
is automatically restored to your CLIÉ handheld through a HotSync
operation. However, this utility restores only the setting file when a
HotSync operation is performed, and it does not restore the utility
itself. Therefore, it is necessary to reinstall this utility after a hard
reset.
icon in the task tray (Notification area)
icon in the task tray (Notification area) , click
®
XP), [Sony Handheld], and then
US
13