Inserting/Removing The Wireless Lan Card - Sony PEGA-WL110 Operating Instructions (primary manual) Operating Instructions Manual

Inserting/Removing the Wireless LAN
Card
Inserting the Wireless LAN card in your CLIÉ
handheld
Insert the Wireless LAN card into the Wireless Communication Slot of
the CLIÉ handheld.
Notes
• Insert the Wireless LAN card squarely into the slot.
• Do not insert the Wireless LAN card in the wrong way. Forcing it in the
wrong way will damage it and cause a malfunction.
• You may be unable to use the Wireless LAN card when the remaining power
of the battery in the CLIÉ handheld is low. Before use, charge the battery fully.
• If your CLIÉ handheld does not recognize the Wireless LAN card after
insertion, remove the card and insert it into the slot again.
US
10
Insert the Wireless LAN card
all the way into the slot until
it is connected.