Figure 3. Blue Service Button Location - Unitec Wash Select II Operation Manual

Enable Coupon
Press the blue service button directly on the back of the bill feed opening, below
1.
the bill stacker.
The Bezel Lights on the bill acceptor opening will start blinking.
2.
Feed the coupon you want to be enabled.
3.
The coupon will be drawn into the bill validator, and then will be ejected.
4.
The flash code LED (see Section 4.3.1.3) will flash 10 times to indicate the
5.
coupon is enabled.
Disable Coupons
Press the blue service button directly on the back of the bill feed opening, below
1.
the bill stacker.
The Bezel Lights on the bill acceptor opening will start blinking.
2.
Feed the coupon you want to be disabled.
3.
Coupon will be drawn into the bill validator, and then will be ejected.
4.
The flash code LED (see Section 4.3.1.3) will flash 3 times to indicate the coupon
5.
is disabled.
Document Number: WS21058
Document Title: WSII Operations Manual ver 6.10

Figure 3. Blue Service Button Location

W A S H S E L E C T I I
32