Preconfigurations - ABB RELION 630 Series Product Manual

Generator Protection and Control
REG630
Product version: 1.3

3. Preconfigurations

The 630 series protection relays are offered with optional
factory-made preconfigurations for various applications. The
preconfigurations contribute to faster commissioning and less
engineering of the protection relay. The preconfigurations
include default functionality typically needed for a specific
application. Each preconfiguration is adaptable using the
Protection and Control IED Manager PCM600. By adapting the
preconfiguration the protection relay can be configured to suit
the particular application.
The adaptation of the preconfiguration may include adding or
removing of protection, control and other functions according
to the specific application, changing of the default parameter
settings, configuration of the default alarms and event recorder
ABB
settings including the texts shown in the HMI, configuration of
the LEDs and function buttons, and adaptation of the default
single-line diagram.
In addition, the adaptation of the preconfiguration always
includes communication engineering to configure the
communication according to the functionality of the protection
relay. The communication engineering is done using the
communication configuration function of PCM600.
If none of the offered preconfigurations fulfill the needs of the
intended area of application, 630 series protection relays can
also be ordered without any preconfiguration. In this case the
protection relay needs to be configured from the ground up.
1MRS757583 C
7