Service Data - Zanussi ZOP67902XU User Manual

Problem
You want to activate the True
Fan Cooking function, but the
indicator of the Plus Steam
button is on.
You want to activate the clean-
ing function, but the display
shows "C4".
The water in the cavity em-
bossment does not boil.
The water comes out of the
cavity embossment.
The appliance is activated and
does not heat up. The fan does
not operate. The display shows
"Demo".

SERVICE DATA

If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
Model (MOD.)
Possible cause
The True Fan Cooking PLUS
function operates.
The Plus Steam button is
pressed in.
The temperature is too low.
There is too much water in the
cavity embossment.
The demo mode is activated.
We recommend that you write the data here:
Push the Plus Steam button
ing PLUS function.
Press the Plus Steam button
again.
Set the temperature at least to
110 °C.
Refer to "Hints and tips" chap-
ter.
Deactivate the oven and make
sure that the appliance is cold.
Wipe the water with a cloth or
sponge. Add the correct
amount of water to the cavity
embossment. Refer to the spe-
cific procedure.
1. Deactivate the oven.
2. Press and hold the button
3. The first digit on the dis-
4. Enter the code 2468 by
5. The next digit starts to
6. Demo mode deactivates
the appliance cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
Remedy
to stop the True Fan Cook-
.
play and Demo indicator
start to blink.
pressing the buttons
to change the values
and press to confirm.
blink.
when you confirm the last
digit and the code is cor-
rect.
or
27