Installation / Set-Up; Applications; Function And Electrical Connection - IFM Electronic ZB0050 Operating Instructions Manual

2

Installation / set-up

2.1

Applications

The safety rope emergency stop switch is used to provide safety-related switching
statuses where large danger areas have to be secured and housings or covers are not
possible.
Typical applications are conveyor systems and rotating machines and large danger
areas.
The safety rope emergency stop switch meets the requirements of EN ISO 13850, IEC
/ EN 60947-5-1 and IEC / EN 60947-5-5.
The safety rope emergency stop switch can be used in applications up to performance
level e according to EN ISO 13849-1.
NOTE
2.2

Function and electrical connection

Make careful note of all information in the operating instructions of the safety rope
emergency stop switch. This document provides all required instructions concerning
installation, mounting, operation and maintenance.
Important note
The products described here are designed to be components of a safety-
oriented machine or control system. A complete safety-related system normally
includes sensors, evaluation units, signalling components and concepts for safe
switch-off. It is the responsibility of each manufacturer of a machine or
installation to ensure a correct functioning of the whole system.
The manufacturer of the safety rope emergency stop switch, his subsidiaries
and affiliates are not in a position to ensure all of the characteristics of a
machine or product which was not designed by him.
The manufacturer accepts no liability for any recommendation that may be
implied or stated here. The warranty contained in the contract of sale is the sole
warranty. Any statements contained herein do not create new warranties or
modify existing ones.
Compliance with the description of the operating instructions of the safety rope
emergency stop switch is mandatory!
4