Table of Contents
Advertisement
2.
General notes
2.1
Introduction
These instructions are an integral part of the delivery of the coupling and must be kept in its vicinity for
reference at all times.
All persons involved in the installation, operation, maintenance and repair of the
coupling must have read and understood these operating instructions and must
comply with them at all times. Flender accepts no responsibility for damage or
disruption caused by disregard of these instructions.
The "FLENDER coupling" described in these instructions has been developed for stationary use in
general engineering applications.
The coupling is designed only for the application described in section 1, "Technical data". Other operating
conditions must be contractually agreed.
The coupling has been manufactured in accordance with the state of the art and is delivered in a condition
for safe and reliable use. It complies with the requirements in Directive 2014/34/EU.
The coupling must be used and operated strictly in accordance with the conditions laid down in the contract
governing performance and supply agreed by Flender and the customer.
The coupling described in these instructions reflects the state of technical development at the time these
instructions went to print.
In the interest of technical progress we reserve the right to make changes to the individual assemblies and
accessories which we regard as necessary to preserve their essential characteristics and improve their
efficiency and safety.
2.2
Copyright
The copyright to these operating instructions is held by Flender.
These instructions must not be wholly or partly reproduced for competitive purposes, used in any
unauthorised way or made available to third parties without our agreement.
Technical enquiries should be addressed to the following factory or to one of our customer services:
8
Flender GmbH
Schlavenhorst 100
46395 Bocholt
Tel.:
+49 (0)2871 / 92-0
Fax:
+49 (0)2871 / 92-2596
FLUDEX 4600 en
Operating instructions 10/2017
Advertisement
Table of Contents
