Structure and function
3
Setup
20 | 66
Building Technologies
Fire Safety
The connection for the connection cable (2) and the swiveling cover (3) are on the
rear of the flame detector. The swiveling cover can be opened to set the parameter
set.
Figure 4: Rear of flame detector
1 Four screws for mounting
2 Connection for connection cable
to base for flame detector
Connection cable
The electrical connection between the base for flame detector and flame detector
is made using the pluggable connection cable.
Figure 5: Connection cable
See also
2 Function [
1
2
3
4
3 Swiveling cover
4 Screw for fixing swiveling cover
21]
007011_m_en_--
2018-06-28