I_Apci1500_Resetboardintroutine - Addi-Data APCI-1500 Technical Description

Standard software
Calling convention:
ANSI C :
unsigned char b_BoardHandle;
unsigned char b_InterruptMask;
unsigned char b_ChannelNbr;
int
Irq = i_APCI1500_TestInterrupt
Return value:
-1: No interrupt
> 0: IRQ number
6)

i_APCI1500_ResetBoardIntRoutine (..)

Syntax:
<Return value> = i_APCI1500_ResetBoardIntRoutine
Parameters:
- Input:
BYTE b_BoardHandle
- Output:
No output signal has occurred.
Task:
Stops the interrupt management of board xPCI-1500.
Deinstalls the interrupt routine if the management of interrupts of all
xPCI-1500 is stopped.
Calling convention:
ANSI C :
unsigned char b_BoardHandle;
Irq = i_APCI1500_ResetBoardIntRoutine (b_BoardHandle);
Return value:
0: No error
-1: Handle parameter of the board is wrong
-2: Interrupt routine is not installed
62
i_Irq;
(BYTE b_BoardHandle)
(&b_BoardHandle,
& b_InterruptMask,
& b_ChannelNbr);
Handle of board xPCI-1500
APCI-/CPCI-1500