4.6.4
Notification Server
4.6.4.1
Notification Server > Notification Server
Setup a notification server. When an event occurs, a notification will be sent to a server.
Figure 4-39 NETWORK > Notification Server > Notification Server
Table 4-38 NETWORK > Notification Server > Notification Server Item and Description
No.
Name
1
Notification server
2
Type
3
IP
4
Port
5
Test
Select/deselect whether to use notification server.
Select TCP or UDP protocol.
Enter the server's IP address or host name.
Enter the server's port.
Send a test message to the server to check the connection status. Click
Save when the transmission is successful.
TCP can check the results in the recorder, but UDP should be checked in the
notification server.
Function
User manual | 56