Motion - Digital Watchdog DW-ENHD16 User Manual

47 | Compressor™ Onvif Encoder
4.5.3

Motion

Set and schedule motion detection for each of the system's channels.
4.5.3.1 Motion > Setup
Set motion detection
No. Name
1 CH
2 Use
3 Area
4 Sens.
5 Beep
6 Alarm
7 Noti.
8 Preset
9 Copy to motion
setup
Placing your mouse on Alarm, Noti., Preset and clicking editing icon (
Note
displays Event: Alarm screen. For more information about Event: Motion screen, see section
"4.5.2 Alarm In > Setup in Alarm In."
Figure 4-30 Event > Motion > Setup
Table 4-29 Event > Motion > Setup Item and Description
Show channel's number.
Enable motion detection for each channel.
Display the motion detection area.
Select the sensitivity level for motion detection (Level 1~10).
Set a beep sound when motion is detected. Select from the available length
options (null, 5 sec, 10 sec, 20 sec, 30 sec, 1 min, 10 min, 30 min, and 1 hour).
Set an alarm output when motion is detected.
Set an e-mail notification when motion is detected.
Set a PTZ camera to move to a specific preset when motion is detected.
Apply setting from a selected channel to multiple channels.
Function
) in right corner