37 | Compressor™ Onvif Encoder
4.4.1.2
Display > Spot
Set the Spot output settings.
No.
Name
1
Sequence
2
Event popup
Figure 4-20 DEVICE > Display > Spot
Table 4-19 DEVICE > Display > Spot Item and Description
Set the channel and dwell time (5, 10, 20, 30sec) when Auto mode is selected.
Sets the hold time for full screen images of a channel when an event occurs
(available options: off, 5, 10, 20, 30sec, continuous).
If multiple channels have an event at the same time, the event channel is shown
as a spilt screen.
Function