25 | Compressor™ Onvif Encoder
4.2.2
Time/Date
Set the date, time, and holidays of the system.
4.2.2.1
Time/Date > Time/Date
Set the date, time, and holidays of the system.
Table 4-4 SYSTEM > Time/Date > Time/Date Item and Description
No.
Name
1
System time
2
DST start
3
DST end
4
Display format
5
Time zone
6
Network time sync When using a specific network time server, click the "Use" checkbox and enter
7
NTP server
Figure 4-5 SYSTEM > Time/Date > Time/Date
Set the date and time.
DST: select whether to use daylight saving time
Time change: save changed time.
Set the starting date of DST
Set the ending date of DST
Select the format to display date and time.
Select time zone.
the server address.
Sync. Interval: select synchronization period (1~7-hour)
Last Sync. Time: displaying the final synchronized time
Select whether to use an NTP server.
Function