Digital Watchdog DW-ENHD16 User Manual page 29

29 | Compressor™ Onvif Encoder
To add a new user group, press "Add Group". The screen below will appear. You can setup the specific permission
levels for this group on this page. You can allow all users assigned to the group access to live view, PTZ control,
access to the setup menu, or firmware update rights. You can also assign specific channels or limit what channels
users in the group can view. You must have at least one group setup to add users (see below).
Table 4-8 SYSTEM > Account > User > Add Group Item and Description
No. Name
1 Name
2 Permission
3
To add a user, press "Add User". The setup window below will appear. Enter the new user's name, user ID and
password and assign to a group.
Table 4-9 SYSTEM > Account > User > Add User Item and Description
No. Name
1 Name
2 ID
3 Password
4 Confirm password
5 Group
Figure 4-9 SYSTEM > Account > User > Add Group
Enter the group's name.
Select the access level for this group.
Select what channels to permit users in the group access to.
Figure 4-10 SYSTEM > Account > User > Add User
Enter the user name.
Enter the user ID. This will be the ID used to log into the system.
Enter the password.
Confirm the password.
Select to the group to which belongs.
Function
Function