System; Network; Time/Date - Digital Watchdog DW-ENHD16 User Manual

2.3.2

System

1 Adjust the system settings in this screen:
Language: Select system language.

Device Name: Enter the device name.

Keyboard ID: Setup the encoder's ID to match the ID settings of a key-

board controller. If you are controlling multiple encoders, setup different
IDs for each encoder.
HDMI / VGA: Set the resolution for the local monitor output

connection.
2 Press Save button to save changes.
3 Press Next to end system settings.
2.3.3

Network

1. Set the encoder's network settings to match your network's
requirements. It is recommended to set the network type to DHCP
and let the encoder auto-detect the network's settings. Then,
change the type to Static.
Please contact your network administrator for more information.
WAN Port: Select whether to use static IP or dynamic IP.

IP Address, Subnet Mask, Gateway, DNS, and Port: If dynamic

network has been selected in the WAN Port options, all these
settings will be adjusted automatically to match your network.
If Static IP is selected, manually enter all the necessary infor-
mation.
2. Press Save button to save changes.
3. Press Next to end Network settings.
2.3.4

Time/Date

1. Set each item in Time/Date setting screen.
Network Time Sync: Select network for synchronizing with a time server.

System Time: Select if you do not wish to synchronize your en-

coder with a network time server. Set the device time and select
whether to enable Daylight saving time (DST).
Time Zone: Select time zone for the system being installed.

DST Start/End: For Daylight saving time, set the application

start and end dates.
2. Press Save button to save changes.
3. Press Next to end Time/Date setting.
User manual | 12