Performance data
2.4 Characteristics of open TCP/IP communication
Table 2- 2
Dependency of the maximum number of RECEIVE calls long (AG_LRECV FC60) used at the same time on
the number of SEND calls (CPU 416/417)
Number of simultaneous
SEND calls
Max. number of simulta-
neous FC60s per
CPU 416/417/41x-H
Number of simultaneous
SEND calls
Max. number of simulta-
neous FC60s per
CPU 416/417/41x-H
The maximum number of SPEED SEND/RECEIVE calls that can be used simultaneously
(FC53, FC63) depends only on the CPU (see above).
2.4
Characteristics of open TCP/IP communication
Open TCP/IP communication provides a program interface for the transfer of connection-
oriented and connectionless services. The establishment and termination of connections is
initiated here only via the "dynamic" program interface.
The CP supports communication via ISO-on-TCP connections for this interface.
Table 2- 3
Open TCP/IP communication
Characteristic
Number of dynamically generated connections over Indus-
trial Ethernet
Max. data length
2.5
Characteristic data for PROFINET IO
PROFINET IO communication of the CP is IRTcompliant. The CP supports the following
maximum configuration as a PROFINET IO controller:
Characteristic
Number of CPs that can be operated as PROFINET IO
controllers within an S7400 station
Number of possible PROFINET IO devices
Size the input area over all PROFINET IO devices
Size of the output area over all PROFINET IO devices
28
0
1
2
3, 4
51
50
49
48
17
18,
20
21
19
37
36
35
34
*)
5
6
7
8, 9
47
46
45
44
22
23,
25
26
24
33
32
31
30
Explanation / values
ISO-on-TCP connections: 1...64
•
1452 bytes
Explanation / values
4
128
, of which
*)
up to 64 in IRT mode
•
up to 32 in "prioritized startup" mode
•
4 KB max.
4 KB max.
10
11
12
13,
14
43
42
41
40
27
28,
30
31
29
29
28
27
26
CP 443-1 Advanced (GX30)
Manual, 03/2019, C79000-G8976-C256-05
15
16
39
38
32
25