Changes In The Main Image - Swegon CONDUCTOR W1 Technical Manual

Changes in the Main image

To set the desired room temperature
Figur 4. The Main image
1.
2.
3.
To set the desired airflow
Figur 5. Main image.
1.
2.
3.
Low airflow corresponds to the ECON operating mode. Normal airflow
corresponds to th AUTO operating mode. High airflow corresponds to the
BOOST operating mode.
Check that the main image is shown in the display.
Press on:
The ▲ UP key to raise the temperature.
•
The ▼ DOWN key to lower the temperature.
•
Press OK or wait 3 seconds to confirm the setting.
Check that the main image is shown in the display.
Press on:
The ► Right key to increase the airflow.
•
The ◄ Left key to decrease the airflow.
•
Press OK or wait 3 seconds to confirm the setting.
The menus of the room unit
4 : 31