Using Your Robot; Starting And Stopping - Philips FC8822 Manual

English
Preparing the room for a cleaning run

Using your robot

Starting and stopping

Charging automatically during use
When the robot has finished cleaning or when only
power remains, it automatically searches for the docking station to
recharge. When the robot searches for the docking station, the light in the
start/stop button turns orange.
When the rechargeable battery is fully charged, the start/stop button
lights up continuously.
Before you start the robot on its cleaning run, make sure that you remove all
loose and fragile objects from the floor. Also remove all cables, wires and
cords from the floor.
Set the power switch on the side of the robot to the 'on' position.
Press the start/stop button.
-
You can press the start/stop button on the robot.
-
You can also press the start/stop button on the remote control.
The start/stop button is continuously on and the robot starts cleaning.
% of the battery