Reset Button - NXP Semiconductors Layerscape LS1046A Getting Started Manual

NXP Semiconductors
Figure 5. Board bottom view

5 Reset button

The FRWY-LS1046A has a reset button for manually triggering a system reset. The reset button is highlighted in
5. The table below describes the reset button.
Table 3. Reset button
Part identifier Switch type
SW6 Push button
The board does not have a power ON/OFF switch. It is powered ON automatically when connected to external
power supply.
Layerscape FRWY-LS1046A Board Getting Started Guide, Rev. 0, 26 April 2019
User's Guide
J55
Location
On top side of PCB next to
UART2/UART4 header (not
visible on chassis)
NOTE
Description
When pressed, resets the board and attached
peripherals
Reset button
J46
D510
Figure 4. on page
6 / 14