The parameters are described as follows:
[Device Name]: Attendance device name. Enter up to 20 characters.
[Device Serial Number]: Serial number of the attendance device.
[IP Address]: IP address of the attendance device.
[Communication port]: Port number of the attendance device. The default value is 4370.
[Attendance Area]: Areas divided on the device for data management.
[Time Zone]: Attendance time divisions.
[Enrollment Device]: If this option is not selected, the uploaded user data is not processed (except attendance
records); if this option is selected, the uploaded user data is processed.
[Data Update Flag]: Types of data to be actively uploaded (mainly software).
[Data Sending Flag]: Data to be delivered to the device (mainly device-supported functions)
[Refresh Duration] (min): Frequency of sending a command request.
[Timed Sending Time]: Time of transmitting data. You can set 10 values, separated by a semicolon.
[The maximum number of commands to communicate with the server]: Maximum number of commands at a
time.
[Inquiry record time] (s): Time interval for Searching device records.
3. Enable the device.
If you enable the device, data is uploaded and delivered properly. (Currently, the function of setting the device as a
registration device is added.)
14.2 User Management
14.2.1 Adding a User
Go to [Personnel] [Person] [New] to add a user.
FaceKiosk Series User Manual 35