Table of Contents
Advertisement
in blacklist will be captured if they appear in the monitor display interface. Captured photo records can be viewed in
[Record Search].
5.7 Blacklist Alarm Function
In the system setting interface, click [Blacklist alarm function] and select to enable. When it is enabled, the alarm bell
will sound for 10 seconds if person in blacklist appears in the monitoring display interface. Click on
in the main
interface to turn off the alarm temporarily, as shown below:
5.8 QR Code Setting
Click [QR code address] in the system setting interface. User can set the URL address of the main interface QR code
to the background server. After setting, use phone to scan the QR code in main interface. Personnel registration
information interface can be displayed on the phone. If the firmware version is above 2.0, and the server address set
in the device is BioTime or ZKBioSecurity software, the QR code generated in the device check-in interface will
automatically obtain the device's serial number information. When user scans the QR code to register, the device's
serial number will be seen in the review interface on software.
18 FaceKiosk Series User Manual
Advertisement
Table of Contents
