Table of Contents
Advertisement
5.3 Attendance Parameters
The relevant attendance parameters can be self-defined. The interface is as follows:
Field Description:
[Duplicate check-in period]: User can set a time-period, in which, repeated attendance record of the same
employee will not be considered. (unit: second)
[Cyclic delete attendance record]: It indicates the duration up to which the attendance records will be saved. That
means, when attendance record reaches the maximum capacity, it deletes the earliest record in cycle. The maximum
capacity of attendance record is 10w. The range value is 0-9999. 0 means no deletion.
[Save attendance photo]: Set if you want to save the captured attendance photo after the face verification. The
default is disabled.
[Cyclic delete attendance photo]: When attendance photo reaches to the maximum capacity, it will delete the
earliest attendance photo in cycle. The maximum capacity of attendance photo is 1w. The range value is 0-9999. 0
means no deletion.
[Check-in title]: Set the display title of FaceKiosk device. (Note: When the device uses BioTime software, meeting
title will automatically switch. It is sent by the software.)
[Check-in time range]: The face appearing in the monitoring area will not be identified if the device is not within
16 FaceKiosk Series User Manual
Advertisement
Table of Contents
