Wiegand Output Setting - ZKTeco FaceKiosk Series User Manual

the Door Sensor Delay (valid value: 1 to 99 seconds).
[Door Sensor Type]: There are three option:
No, Normally Open Normally Closed
, and .
No
means door sensor is not in use;
Normally Open means the door is always opened in power-on condition;
Normally Closed
means the door is always closed in power-on condition.
[Door Alarm Delay (s)]: When the state of the door sensor is inconsistent with that of the door sensor type, alarm
will be triggered after a time period; this time period is the Door Alarm Delay (valid value: 1 to 99 seconds).
[Alarm]: Select the turn on the alarm function.

12.2 Wiegand Output Setting

Click on [Wiegand output setting] to set the related parameters, as shown below:
Field Instruction:
[Type]: Displays default User ID and it cannot be modified.
[Wiegand output bits]: The default is Wiegand34. Other options are Wiegand26, Wiegand26a, and Wiegand34a.
[Pulse Width (us)]: The default value is 100, the range is 20-400.
[Pulse Interval (us)]: The default is 1000, the range is 200-20000.
[Failed ID]: It is defined as the output value for failed user verification. The output format depends on the [Wiegand
Format] setting. It's disabled by default; the range is 0 - 65535.
FaceKiosk Series User Manual 31