Setup - Moniteq Crypto-Lock CC-8521B Instruction Manual

Setup

1) Set the Output Source switch (S2) to 12 or 24VDC as dictated by the voltage rating
of the lock being used. If both lock types are being used, they must have the same
voltage rating.
2) Set the Output Mode switch to LIMIT when used with Brute electric lock or a similar
heavy-duty solenoid operated lock. Set this switch to DIRECT when used with
standard electric strikes or magnetic locks.
3) Connect the power cord to an appropriate source of AC power and verify that the
Power LED illuminates.
4) Enter the valid PIN code on the keypad and verify that the lock releases and that the
green LED on the keypad illuminates.
10