Related Manuals for Moniteq Crypto-Lock CC-8521B
Summary of Contents for Moniteq Crypto-Lock CC-8521B
- Page 1 Crypto-Lock Model CC-8521B Rev. 1.4 (05/12) Access Control System INSTRUCTION MANUAL MONITEQ, Inc.
-
Page 3: Table Of Contents
TABLE OF CONTENTS INTRODUCTION……………………………………………………………..4 SPECIFICATIONS…………………………………………………………...6 SUPPLIED EQUIPMENT……………………………………………………6 FUNCTIONS OF CONTROLS AND INDICATORS………………………7 4.1 KEYPAD 4.2 CONTROL UNIT INSTALLATION AND POWER SUPPLY SETTINGS……………………8 5.1 GENERAL 5.2 INSTALLATION 5.3 POWER SUPPLY SETTINGS PROGRAMMING……………………………………………………………10 6.1 GENERAL 6.2 THE PROGRAMMING MODE 6.3 INITIAL SETTINGS 6.4 PIN MANAGEMENT 6.5 DOOR MONITORING OPEN DURATION... -
Page 4: Introduction
INTRODUCTION The Crypto-Lock Model CC-8521B is a versatile, easy installed and operated single door access control system. It provides reliable, secure keypad access control using a single 3, 4, 5 or 6-digit PIN code for all users. It can be used with virtually all magnetic locks and electric strikes and can be used to operate both a magnetic lock and an... - Page 5 Features: 3, 4, 5, or 6-digit Adjustable open Block after invalid duration * Door Propped Alarm PINs * Forced Door Alarm Versatile lock power * Anti Follow Through Fail safe, fail secure or both * Built-in lock power supply with 12VDC or 24VDC @ 2A, 16A In-rush battery back-up capability Holding current limiting protects lock...
-
Page 6: Specifications
Door monitoring functions: Door Battery back-up: 12VDC or 24VDC, propped open alarm, forced door alarm, automatic transfer and charging anti-tailgating (batteries optional, Moniteq p/n CC- Keypad cable: 10-conductor, #22 BATT) supplied cable: 15 ft., 10-cond., #22 Battery monitoring: Warning lamp, maximum length: 1,000 ft. -
Page 7: Functions Of Controls And Indicators
FUNCTIONS OF CONTROLS AND INDICATORS 4.1 KEYPAD BATTERY Indicator LED: Indicates that Normal Operation Mode: the system is battery powered. Keys 1 through 0: Used to enter the PIN OUTPUT VOLTAGE switch (24V or code. 12V): Selects the voltage that will # Key: Sounds an annunciator in the operate the locking device(s) attached Control Unit and also activates a 12... -
Page 8: Control Unit
7AH re-chargeable sealed lead acid supplied #8 threaded rods, acorn nuts, hex batteries. (Moniteq Type CC-BATT) nuts, and 1 ½” washers. Alternatively, the 10) Set the AC Power switch in the Control Keypad can be mounted using the four #8 Unit to either 115VAC or 230VAC and x 1 ½”... - Page 9 1 2 3 4 5 6 7 8 9 10 1 2 3 4 1 2 3 1 2 3 4 5 6 1 2 3 4 5 6 7 8 9 TRANSFORMER Door Switch MONITEQ, Inc. Tel. 1-800-989-9891 Model CC-8521B Crypto-Lock NSN 6350-01-185-4505 BATTERY REQUEST TO EXIT BATTERY...
-
Page 10: Programming
6. PROGRAMMING 6.1 GENERAL Programming Mode and then entering Programming includes: setting the valid the programming sequences listed in PIN, open duration time, invalid PIN Table 6-1 on the Keypad. Programming penalty time, and options for the door sequences are entered on the Keypad propped and forced door alarms. -
Page 11: Door Monitoring
valid PIN and is particularly effective in Door Propped Alarm: protecting PINs with only 3 or 4 digits. The Door Propped Alarm function An Invalid PIN Alarm feature sounds an sounds an alarm when the door remains alarm (three short beeps) whenever an open for more than a period of time from invalid PIN is entered. -
Page 12: Operation
7. OPERATION To operate the CC-8521B, enter the penalty time is set to 60 seconds until valid 3, 4, 5 or 6-digit PIN code on the the valid PIN is entered. After the Keypad. When the valid PIN code is penalty time has elapsed, the unit will entered, the green LED on the Keypad return to normal operation and entering... -
Page 13: Keypad Installation Template
8. KEYPAD INSTALLATION TEMPLATE CRYPTO-LOCK Models CC-8421B and CC-8521B Keypad Mounting Template Keyhole (for #8 screws) 3/4" D (cable grommet) Threaded inserts for 8-32 screw or threaded rod Pilot holes 3-5/8"... -
Page 16: One Year Limited Warranty
One Year Limited Warranty MONITEQ products are warranted to be free from factory defects for a period of one year from the date of shipment. The repair or replacement of a defective part shall be at the option of the factory when the product is shipped prepaid and insured by the owner.
Need help?
Do you have a question about the Crypto-Lock CC-8521B and is the answer not in the manual?
Questions and answers